A TruePane company - serving Enterprise, NV

Entry Doors in Enterprise, NV

Entry doorsEntry doors
Single hungSingle hung
Double hungDouble hung
Horizontal rollerHorizontal roller
CasementCasement
Bay & bowBay & bow
Sliding glass doorsSliding glass doors
Impact garage doorsImpact garage doors
PGTPGT
CGICGI
Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Get your free estimate
Explore

Styles & brands we work with

  • Single hung
  • Double hung
  • Horizontal roller
  • Casement
  • Bay & bow
  • Sliding glass doors
  • Entry doors
  • Impact garage doors
  • PGT
  • CGI
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Entry Doors in Enterprise, NV

An entry door replacement in Enterprise typically runs $650 to $2,400 installed, depending on door material, whether the frame is being rebuilt, and whether you choose steel, fiberglass, or a wood-stave option. That’s the honest range, and we quote it on paper before any hardware comes off the wall. Entry doors are the one opening in a house that has to do three jobs at once: keep the weather out, hold the lock, and make the front of the home look like somebody cares about it. We install all three kinds of door here every week, and we’ve seen what Nevada sun, monsoon wind, and twenty years of settling do to each of them.

TruePane Windows & Doors Enterprise is an authorized installer for more than a dozen manufacturer lines, including Therma-Tru and ES Windows, with side-by-side quotes printed so you can see exactly what you’re buying. Every entry door job is covered by the 90-Day Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before we leave your driveway. A live person answers the phone at (844) 629-7617, day or night. If you’re comparing entry doors against other exterior openings, our Door Installation in Enterprise page covers the full scope of what we do.

We hire local, train apprentices into journeymen, and treat the front door as the one place in the house where first impressions and weather sealing happen at the same junction. Our technicians have up to 18 years of experience, and they measure every opening twice, because an entry door that binds in July is almost always a rough opening that was measured once. If the pane is not true, the job is not done.

When You Need Entry Doors

In Enterprise, most of the homes we work on were built between the mid-1990s and the early 2000s. That’s the sweet spot for entry door failure, and the symptoms tend to show up in the same handful of ways.

  • The door sticks or binds in summer. This is the single most common call we get in Enterprise from June through September. Steel doors absorb heat, the slab expands, and a door that swung freely in March has to be shouldered in August. It’s rarely just a hinge problem; it usually means the rough opening wasn’t square or the original install didn’t account for thermal movement.
  • Sun-faded finish or chalky paint. The south and west-facing entries here take punishing UV. A wood or fiberglass door that hasn’t been refinished in a decade will show hairline cracks and a powdery surface, and once that finish fails, moisture gets into the substrate.
  • Daylight visible around the edges. If you can see light at the threshold or the strike side, your weatherstripping, threshold sweep, or door slab itself has warped. Wind-driven monsoon rain finds that gap every July, and so does the dust.
  • The lock or deadbolt no longer lines up. A deadbolt that needs a shoulder to engage means the slab has shifted on its hinges. Forcing it wears the lock body and, over time, the strike plate pulls out of the frame.
  • Drafts you can feel at the bottom of the door. An old sweep and a settled threshold let hot air in all summer and cool air out, and you’ll see it on your power bill before you feel it at the door.
  • The door looks dated against a renovated house. Plenty of Enterprise homeowners have updated the kitchen, the flooring, and the paint, and the front door is now the only thing that still reads 1999. That’s a fair reason to replace a door that’s still functional.

If you’re also dealing with failing windows at the same time, our window replacement in Enterprise page covers the parallel conversation.

Our Entry Doors Process

Entry door installation is a sequence, and skipping a step is how you end up with a door that binds. Here’s the order we work in.

  1. Measure the rough opening twice. We measure the frame, the slab, the swing, and the reveal at the jamb. If the existing rough opening is out of square or undersized, we say so before anyone commits to a door that won’t fit. On homes in the older sections of Enterprise, we regularly find framing that has moved a quarter inch or more over twenty-five years of thermal cycling.
  2. Put the manufacturer quotes side by side on paper. We’ll show you a steel door, a fiberglass door, and a wood option from different lines, including Therma-Tru and ES Windows, with the price, warranty duration, and finish options for each. You’ll see exactly what each one costs and what each warranty actually covers before you choose.
  3. Pull the old door and inspect for rot, damage, or prior bad work. If there’s rot in the framing or a threshold that was shimmed with cardboard, we fix that before the new door goes in. The Keystone Standard includes both manufacturer warranty layers registered in writing, and we can’t register a warranty in good conscience over a compromised opening.
  4. Set, shim, and seal the new door. The door gets set plumb, shimmed at the hinge points and the strike, insulated, and back-caulked to the sheathing. This is the step that determines whether the door still swings right in ten years and whether the warranty holds up.
  5. Install hardware and check the swing. Handleset, deadbolt, weatherstripping, threshold sweep. We swing the door open and closed a dozen times and check the reveal on all four sides before we call it done.
  6. Register both warranty layers and hand you the paperwork. Both manufacturer warranty layers, written into the record with durations stated, before we leave. If something goes wrong inside the 90 days, we make it right with no paperwork fight and no arguing.

Most entry door jobs are completed in a single visit. If you’re also scheduling other work, our Door Installation page covers interior and additional exterior doors.

Entry Doors Pricing in Enterprise

Here’s what entry door replacement actually costs in the Enterprise market. These are ranges, not quotes; the free estimate is where we put a real number on paper.

Work Typical price range
Steel entry door, prehung, labor and materials $650 – $1,100
Fiberglass entry door, prehung, labor and materials $1,000 – $1,800
Wood or premium fiberglass entry door, labor and materials $1,400 – $2,400+
Door slab only (keep the existing frame) $350 – $750
Frame or rough opening repair (rot, out-of-square, framing) $250 – $900 additional
Hardware upgrade: handle set, deadbolt, smart lock $150 – $600
Finished trim, threshold, and exterior sealing $150 – $400

What moves the price? Door material is the biggest lever. Steel is the most affordable and the most prone to heat movement in our climate. Fiberglass holds its finish longer under Enterprise UV and is what most of our homeowners end up choosing for a west or south-facing entry. A door that faces the afternoon sun here will fade and degrade faster than the same door on a north wall, and we price refinished or factory-finished options accordingly. Frame condition is the second lever, and it’s the one nobody can predict until the old door is out. Sidelites, transoms, and any custom sizing add cost. So does a hardware set with a keypad or an integrated smart lock.

What doesn’t move the price: nothing. We quote upfront on paper, and there are no surprise line items on the bill. Standing offers are $50 Off Any Repair Over $250 and an $89 Seasonal Tune-Up, plus a permanent 5% discount for seniors and veterans. There’s no charge for the estimate, and no pressure to sign it on the spot. Call (844) 629-7617 for a free estimate.

A note on what you’ll see in the Enterprise market

We’re not the cheapest bid in the room, and we can tell you why in person. We see entry door jobs across Enterprise where the frame was never inspected, the door was set on a threshold that had already failed, and the manufacturer warranty was never registered. When you go comparing quotes, ask two questions: what’s the rough opening condition, and will both warranty layers be registered in writing? If a bidder can’t answer both, the price is missing something.

FAQs – Entry Doors

How much does entry door replacement cost in Enterprise?

Entry door replacement in Enterprise typically runs $650 to $2,400 installed, with fiberglass doors landing most often between $1,000 and $1,800. The variables are door material, frame condition, hardware, and whether the rough opening needs repair. We quote on paper before any work starts. Call (844) 629-7617 for a free estimate and we’ll give you an exact number.

Can you install my entry door the same day I call?

Some entry door replacements can be done the same day, though most require a scheduled visit so we can bring the right door and hardware. A live person answers the phone 24 hours a day, so call (844) 629-7617 and we’ll tell you honestly what the timeline looks like for your door.

Is it cheaper to repair or replace an entry door in Enterprise?

Repair is cheaper when the problem is hardware, weatherstripping, or hinge adjustment. Replacement is the better value when the slab is warped, the frame has rot, or the door binds every summer; at that point you’re paying for repairs on a door that will keep needing them. We’ll tell you which situation you’re in during the free estimate, not after. Call (844) 629-7617 to schedule one.

What entry door material holds up best in Enterprise’s climate?

Fiberglass holds up best in Enterprise, particularly on doors facing south or west, because it resists UV fade and thermal movement better than steel or wood. Steel is affordable but expands in heat and can bind by July. Wood looks right on the older stucco homes here but needs regular refinishing against our sun. We’ll show you all three side by side on paper with warranty durations, then let you decide.

Do you register the manufacturer warranty?

Yes, both manufacturer warranty layers are registered in writing, with durations stated, before we leave your driveway. That’s The Keystone Standard, and it’s not optional on any job. Call (844) 629-7617 if you have questions about what’s covered.

What areas around the valley do you serve?

We serve Enterprise and the surrounding valley communities. If you’re just outside our regular area, call (844) 629-7617 and we’ll let you know whether we can reach you.

Ready to get the front door done right? TruePane Windows & Doors Enterprise is the last call you’ll need to make on a window or door. Call (844) 629-7617 for a free estimate, and a live person will answer. Both manufacturer warranty layers registered in writing, 90 days of workmanship backed in full, and a door that still swings true when the summer heat comes back around.

Written by the team at TruePane Windows & Doors Enterprise, serving Enterprise.

Need Windows & Doors help in Enterprise? Licensed & insured · free written estimates
Call (844) 629-7617
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - TruePane Windows & Doors Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch