Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTrusted Custom Windows & Doors for Enterprise Homeowners
If you’ve lived in your Enterprise house for twenty years, you’ve probably watched a few things go crooked: a patio door that drags on its track every July, a bedroom window that whistles when the wind comes off the Spring Mountains, a seal that fogged over and never cleared. Custom windows and doors solve those problems at the source, because every opening is measured and built for your wall, your stucco, and your exposure – not pulled off a shelf and shimmed until it fits. Our technicians have up to 18 years of experience, and we quote manufacturer lines side by side on paper so you can see what you’re buying. Call (844) 629-7617 and a live person answers, day or night.
What Our Custom Windows & Doors Service Includes
Custom work in Enterprise means something different than it does in a climate with gentle seasons. The desert out here swings from triple-digit afternoons to cold winter nights, and the sun hits west-facing glass with a force that standard builder-grade units weren’t built to take. That’s the reality we design around. Here’s what the work covers.
Custom Window Fabrication and Sizing
A custom window is one built to the exact dimensions of your rough opening, with the frame profile, glass package, and operating style you choose rather than the closest stock size. You need it when a stock unit would mean cutting back plaster, adding filler trim, or living with a window that never quite matches its neighbors. We measure every opening twice, confirm the wall depth and the stucco return, and specify the glass for southern Nevada’s sun load – low-E coatings and laminated options that hold up to UV instead of cooking the room behind them.
Custom Door Design and Installation
Custom doors cover entry systems, French doors, and full glass patio sliders built to your opening and your hardware. The right time to go custom is when an existing door has settled out of square, when you want a wider clear opening than a stock slab allows, or when the door has to match a style the big-box aisle doesn’t carry. We hang Therma-Tru and other manufacturer lines, set the threshold so it drains away from the house, and check the latch and deadbolt alignment before we call the job finished.
Arched, Radius, and Special-Shape Openings
Enterprise has a lot of 1990s and 2000s homes with arched transoms, radius windows, and angled corner glass, and those openings can’t be filled with anything off the rack. You need custom fabrication when the shape itself is the problem, whether it’s a half-round over the front door or a trapezoid in a stairwell. We template the opening, order the unit to the template, and dry-fit before setting so the curve actually follows the wall.
Glass Packages and Frame Finishes
The glass and frame choices are half the value in a custom order. We walk you through laminated impact glass, dual-pane low-E, tinted options for west-facing rooms, and frame finishes from vinyl to aluminum to wood-clad, with the tradeoffs stated plainly. If you’re weighing impact-rated units against standard glass, we’ll show you both lines on paper with the pricing side by side. This is the part of the job where a homeowner who asks good questions gets a much better window.
Trim, Casing, and Finish Carpentry
Custom windows only look custom if the trim matches. We handle interior casing, sill returns, and exterior trim so the new unit reads as part of the house rather than an insert. When a job involves stucco patching or paint touch-up, that’s spelled out on the quote before we start, not added after. No surprise line items on the bill.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Brands We Service for Custom Windows & Doors
We’re an authorized installer for more than a dozen manufacturer lines, and that matters most when something needs service rather than replacement. ES Windows builds aluminum and vinyl systems common in desert homes, and we know where those frames and hardware wear first – the rollers, the weatherstripping, the corner welds that take the heat. ECO Window Systems units show up in a lot of Enterprise houses too, and we’ve learned their glass and frame tolerances well enough to specify a match when one opening needs to blend with the rest of the house.
On the door side, Therma-Tru entry systems are everywhere in this valley, and we know their slab construction, hinge placement, and sill options well enough to diagnose a door that binds before we recommend replacing it. Whether you have ES Windows, ECO Window Systems, Therma-Tru, or any other make, we can help – and we’ll tell you honestly when a repair makes more sense than a new order, because a callback costs us more than a straight answer does.
Signs You Need Custom Windows & Doors Right Now
- Fogged or cloudy glass. Seal failure lets moisture between the panes, and in Enterprise’s dry heat that haze usually means the unit is past saving. It’s not urgent in a safety sense, but the insulation value is already gone and your cooling bill is paying for it.
- Doors that drag, stick, or won’t latch. A door that binds in July and swings free in January is telling you the opening has moved or the slab has warped. Left alone, the frame and threshold take the wear, and a small adjustment turns into a replacement.
- Drafts and dust along the frame. If you can feel air or see daylight at the edges, the weatherstripping or the fit is failing. In a custom replacement, that’s the exact problem a properly sized unit eliminates.
- Condensation on the inside of the glass. Water beading on the room side points to a failed thermal seal or a glass package that was never right for this climate. It’s worth a look before the frame or sill shows water damage.
- Cracks in the frame or a sash that won’t stay put. Vinyl and aluminum both fatigue in desert sun over time. A cracked frame or a sash that drifts open is a security and efficiency problem at once, and it’s the clearest sign a custom order is worth pricing.
Our Custom Windows & Doors Process – Step by Step
- 1
Measure twice, in person. We come to the house, measure every opening twice, and note wall depth, stucco thickness, and how the existing unit was set. This is where most bad installs actually begin, so it gets the most time.
- 2
Side-by-side quotes on paper. We put the manufacturer lines next to each other with pricing, glass packages, and warranty durations stated, so you’re comparing real numbers instead of a single lump sum. Ask questions; that’s what the visit is for.
- 3
Order and scheduling. Once you choose, we order the units and give you a firm window for the install. We’ll be there when we say, uniformed and prepared, with the right trim and sealants on hand.
- 4
Installation and dry-fit checks. We dry-fit before setting, check plumb, level, and square at each opening, and seal and flash so water sheds away from the wall. Every unit gets operated and latched before we move to the next one.
- 5
Warranty registration before we leave. Under The Keystone Standard, both manufacturer warranty layers get registered in writing with durations stated before the truck leaves the driveway. If it’s not done right within 90 days, we make it right – no paperwork fights, no arguing.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Custom Windows & Doors Cost in Enterprise?
A typical custom window in Enterprise runs $650 to $1,400 per opening installed, depending on size, glass package, and frame material. A custom entry door usually lands between $1,800 and $4,500 installed, and a full glass patio slider runs $2,500 to $5,500. Impact-rated glass adds cost over standard dual-pane, and special-shape openings run higher because the fabrication is one-off.
What drives the price: the number of openings, the glass specification, the frame finish, whether the wall needs patching or new trim, and how far the unit travels from the manufacturer. The way to avoid overpaying is to get the line items on paper and compare them, which is exactly how we quote – manufacturer lines side by side, with what’s included spelled out.
Every free estimate covers a full measure of each opening, the glass and frame options with pricing, warranty durations, and a written scope that states what’s included in trim, sealant, and cleanup. Standing offers include $50 off any repair over $250, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. Call (844) 629-7617 for an exact quote – estimates are free.
Custom Windows & Doors Near Enterprise – Our Service Area
We work throughout Enterprise and the surrounding valley, including Summerlin, Winchester, Spring Valley, and Paradise, with regular jobs reaching Henderson, Whitney, Sunrise Manor, and North Las Vegas. Scheduling is straightforward in most of these neighborhoods, and we’ll give you a firm date rather than a vague window. If you’re comparing options across the valley, our Custom Windows & Doors in Spring Valley page covers the same work for that side of town.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Custom Windows & Doors in Enterprise
Custom windows and doors are built to the exact dimensions and specifications of your openings rather than sold in standard stock sizes. That means the frame, glass package, and operating style are chosen for your house, your wall depth, and your sun exposure. In Enterprise, that usually means specifying glass and finishes that hold up to desert heat and intense UV. Call (844) 629-7617 to talk through what your openings need.
From order to finished install, most custom jobs take four to eight weeks, with the installation itself usually finished in one to three days depending on how many openings are involved. Fabrication time is the long pole, since custom units are built to your measurements. We give you a firm install date when you order and stick to it. Call (844) 629-7617 to schedule a measure and get a realistic timeline.
Custom windows typically run $650 to $1,400 per opening installed, custom entry doors $1,800 to $4,500, and patio sliders $2,500 to $5,500, depending on size, glass, and frame material. Impact-rated glass and special shapes push the numbers higher. We quote manufacturer lines side by side on paper so you can see exactly where the money goes. Call (844) 629-7617 for an exact quote – estimates are free.
Yes. We service ES Windows, ECO Window Systems, and Therma-Tru systems, along with more than a dozen other manufacturer lines including Andersen, Pella, Marvin, Milgard, PGT, and CGI. We know where each brand’s hardware and seals wear first in this climate. If a repair will outlast a replacement, we’ll tell you so. Call (844) 629-7617 to describe what’s failing and we’ll point you the right direction.
Yes, and a live person answers the phone 24 hours a day, seven days a week. A broken pane or a door that won’t secure is a real security concern, so we take those calls whenever they come in. Custom orders still take fabrication time, but we can secure the opening and get the replacement moving. Call (844) 629-7617 any hour and you’ll reach someone, not a voicemail tree.
The work is covered by the 90-Day Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, with durations stated, before the truck leaves the driveway. If something isn’t right within 90 days, we make it right with no paperwork fights. We put the warranty terms in writing at the quote stage so there’s nothing to discover later. Call (844) 629-7617 and we’ll walk you through exactly what’s covered.
Clear a few feet of space inside each opening, take down curtains and blinds, and move anything breakable away from the work area. We handle furniture protection and cleanup, but a clear path saves time on the day. If you have pets, a closed room away from the work keeps them calm. Call (844) 629-7617 if you have questions about a specific room before we arrive.
Schedule Your Custom Windows & Doors Service in Enterprise Today
If your windows are fogged, your doors bind, or you’re ready to price a custom order the right way, call TruePane Windows & Doors Enterprise at (844) 629-7617. A live person answers every call, day or night. You’ll get a free, no-obligation estimate with manufacturer lines quoted side by side and every warranty duration in writing. If the pane is not true, the job is not done. That’s the standard on every Enterprise job.
Written by the team at TruePane Windows & Doors Enterprise.