Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateTherma-Tru Window Installation: The Enterprise Owner’s Guide
We install and service Therma-Tru window and door components for Enterprise homeowners, and the majority of single-unit replacement work here lands between $420 and $1,150 installed, depending on the model line and the hardware involved. Most Enterprise calls start the same way: a Therma-Tru unit that closed cleanly for years suddenly binds in July, or a seal fails and the glass fogs from the inside, and the owner wants to know whether it is a part, a sash, or the whole unit. We answer that question on the phone before anyone is dispatched.
Which Therma-Tru Models This Applies To
Therma-Tru is best known for entry doors, so window and sidelite work under this brand often falls into the sidelite, transom, and decorative glass categories rather than stand-alone casement or double-hung lines. The first step is identifying what you actually have. Look for the certification label on the frame jamb or the sash edge; Therma-Tru units carry a model and series designation there, and that label determines which glass pack, hinge set, and sill component will fit. Measuring the rough opening alone is not enough. Therma-Tru has changed hinge styles and sill profiles across production years, and a component that looks identical on the shelf can be off by a fraction that shows up as a bind two summers later.
On the OEM-versus-aftermarket question, our position for Enterprise owners is straightforward: OEM when the part is a structural or weather-seal component and the model is still supported, quality aftermarket when the OEM line is discontinued or the lead time runs past a season. We quote both on paper, side by side, so you see the price and the difference in the part. We are an independent service provider and are not affiliated with Therma-Tru, which means we have no reason to steer you toward a part that does not serve the job. We also service PGT, CGI, and CWS units for Enterprise homeowners who have mixed brands across the house.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your Therma-Tru Window Installation Is Failing
Enterprise sits in the high desert, and that shapes what fails first. Afternoon heat cycling in summer and hard winter morning swings work seals and hardware harder than in milder climates. Here is what we see most:
- Binding or dragging when you open or close it. Usually a hinge or pivot component that has worn oval, or a frame that has shifted slightly out of square. In Enterprise, this often appears in late June and seems to “fix itself” in October, which is the clue.
- Fogging or condensation between the panes. The seal on the insulated glass unit has failed and moisture has entered the cavity. No amount of cleaning fixes this; the glass unit is replaced, not repaired.
- Daylight visible around the sash when closed. Weatherstripping has compressed or pulled loose. Left alone, it lets driven dust and monsoon-season rain past the seal.
- Water staining on the interior sill after a storm. A failed sill pan, weep system, or sealant joint is letting water in and not letting it out. This one gets worse quietly and is worth catching early.
- Loose or stripped hardware screws. The fastener has lost bite in the frame, often from repeated heat expansion. Retightening helps briefly; the real fix is a proper anchor or a hardware replacement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for Enterprise runs roughly as follows. These are real ranges, not teasers, and every quote we write is line-itemed so you can see the part cost and the labor cost separately.
| Scope of work | Typical installed range |
|---|---|
| Hardware or hinge component replacement | $180 – $340 |
| Weatherstripping and seal replacement | $150 – $290 |
| Insulated glass unit replacement (single) | $320 – $620 |
| Sidelite or transom component service | $420 – $1,150 |
What drives the range: model line, whether the part is OEM or aftermarket, glass type, and access. What is included every time: measurement of the opening before and after the work, the part, labor, cleanup, and a 90-day workmanship guarantee under our Done Right Promise. Both manufacturer warranty layers are registered in writing before we leave, with durations stated.
DIY or Call Us?
Some checks are safe for an owner. You can look for the certification label, note whether binding is seasonal, clean weep holes, and confirm whether the fogging is inside the glass or on the room-side surface. Those observations help us and cost you nothing.
Where it goes wrong is at the glass unit and the frame. Insulated glass units are heavy, awkward, and easy to twist out of true during a solo swap, and a frame install that is a fraction out of square will void the manufacturer warranty on the unit. On sidelite and transom work, there is also real weight overhead and glass that will not forgive a slip. We would rather you call than take that on. Call (844) 629-7617 and a live person will pick up, day or night, and give you a straight answer on whether your Enterprise job is a part swap or a bigger scope.
FAQs
Hardware and seals typically hold up 10 to 15 years in our climate, and insulated glass units often go 15 to 20 before the seal fails. The high-desert swing between summer heat and cold winter mornings is the main reason Enterprise units land on the shorter end of those ranges compared with coastal climates. Call (844) 629-7617 for an exact quote on your unit – estimates are free.
Sometimes. Hardware can often be adjusted or partially rebuilt, and weatherstripping is a straightforward replacement. A fogged insulated glass unit cannot be repaired; the seal is gone and the glass must be replaced. We tell you which situation you are in before any work starts, and we do not sell a replacement when a repair will hold. Call (844) 629-7617 to schedule a free estimate.
Most single-component jobs are finished in a single visit, often in two to three hours, and we confirm the timeframe when we quote. If a special-order part is needed, we tell you the lead time up front rather than leaving you waiting on a second appointment. Call (844) 629-7617 for a quote on your Enterprise job.
We source Therma-Tru components through authorized distribution and, where the OEM line is discontinued, through quality aftermarket suppliers we have used for years. You get the OEM and aftermarket options quoted side by side on paper, so you see exactly what you are buying and what it costs. Call (844) 629-7617 for a free estimate.
If your Therma-Tru unit is binding, fogging, or leaking, the fix is usually smaller than the worry. Call (844) 629-7617 for a free estimate in Enterprise. Our technicians have up to 18 years of experience, we answer the phone around the clock, and we back the work with the 90-Day Done Right Promise – because if the pane is not true, the job is not done.
Written by the team at TruePane Windows & Doors Enterprise, serving Enterprise and nearby areas.