Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateMr-Glass Window Installation: The Enterprise Owner’s Guide
We install and service Mr-Glass windows and doors for Enterprise homeowners, and a full window installation here typically runs $650 to $1,900 per opening depending on size, glass package and whether the frame is replaced. Whether a window or door can be set in a single visit depends on the unit and what we find at the rough opening, so the honest answer comes after we measure. If you have a Mr-Glass unit that’s fogged, leaking or refusing to close square, you’ll usually know because the glass fogs between the panes after a hard monsoon, water shows up on the sill, or the sash drags and won’t seal. We’re an independent installer, not affiliated with Mr-Glass, and we’ll tell you plainly whether you need a repair or a new unit.
Which Mr-Glass Models This Applies To
Mr-Glass has made residential aluminum and vinyl windows and sliding doors in several frame profiles over the years, and the series stamped on the spacer bar or the manufacturer label in the frame channel tells you what you’re working with. For sliders, the giveaway is often the roller: older Mr-Glass panels ride on a single flat wheel, and the profile of the track and the wheel placement have to match the replacement. Measure the visible glass, the frame outside dimension and the depth of the track before you order anything, because a part that’s a sixteenth of an inch off will bind once it’s loaded in Enterprise heat.
On the OEM-versus-aftermarket question, my advice is usually straightforward: for glass and sealed units, use a matching or equivalent sealed assembly (either is fine for glass since it isn’t a “Mr-Glass part”); for hardware like rollers, locks and weatherstrip, OEM fit matters more because the aftermarket sizing is inconsistent. We’re a qualified installer for more than a dozen manufacturer lines, including Andersen, Pella, Marvin, Milgard, Jeld-Wen, PGT, CGI, and ES Windows, and we also service PGT, CGI and CWS units. We carry no parts on a truck. What we do is source the right part for your Mr-Glass unit and install it correctly the first time.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your Mr-Glass Window Installation Is Failing
The symptoms below are the ones we see most in Enterprise homes.
- Condensation or fogging between the panes. The seal on the insulated glass unit has failed, letting moisture into the air space. Once that seal breaks, the glass won’t clear and the unit usually needs replacing rather than resealing.
- Water on the sill after rain or a monsoon. Worn weatherstrip, a failed corner seal or a frame that’s moved out of square lets water past the window. Left alone, this rots the rough opening and shows up as a stain on the drywall below.
- A sash that drags or won’t latch. In Enterprise’s dry heat the frame expands and contracts hard, and vinyl or aluminum tracks can warp enough that the sash no longer closes flat. Sometimes it’s the hardware; often the whole unit has shifted.
- Visible cracks, chips or a broken pane. A broken lite compromises the seal and, in a slider, the security of the unit. A single pane can sometimes be replaced, but a cracked insulated unit usually means a new sealed assembly.
- Draft coming off the glass or frame. Air infiltration points to worn seals or a frame that’s no longer tight in the opening. If weatherstrip replacement doesn’t fix it, the issue is the set of the unit itself.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the range we quote for window installation in Enterprise, parts and labor split out so you can see where the money goes.
| Item | Typical Installed Range |
|---|---|
| Single-pane glass replacement | $180 – $420 |
| Insulated (dual-pane) sealed unit, standard size | $350 – $750 |
| Slider roller and hardware replacement | $120 – $280 |
| Weatherstrip and seal replacement | $95 – $220 |
| Full window replacement (frame-in, per opening) | $650 – $1,900 |
What drives the range: window size, glass type (low-E, laminated impact glass and tint options cost more), frame material, and whether we’re resetting the unit in the existing opening or doing a full frame-out replacement. Our quote is a written line-item price with no surprise charges on the bill, and the work is covered by our 90-Day Done Right Promise – if it’s not done right, we make it right with no paperwork or arguing. Both manufacturer warranty layers are registered in writing under The Keystone Standard before we leave.
DIY or Call Us?
There’s a short list of things you can safely check yourself: look for a manufacturer label in the frame channel to identify the model, confirm the sash moves freely without forcing it, wipe the sill dry and watch for water after the next rain, and note whether the fogging is between the panes or on the room side. Anything past that – replacing a sealed unit, resetting a frame, swapping rollers on a loaded slider – is where homeowners get into trouble. Heat-weakened seals and out-of-square frames won’t stay fixed by guesswork, and a mis-set unit leaks again the first rains. Call (844) 629-7617, a live person answers day or night, and we’ll get you a free estimate with the part matched to your Mr-Glass unit.
FAQs
How long does a Mr-Glass window installation or part swap last in Enterprise? A properly installed sealed unit or glass replacement typically lasts 15 to 20 years; roller and hardware replacements rarely go more than 8 to 12. Enterprise’s heat and dry air speed up seal failure and weathering compared with coastal conditions, and direct afternoon sun ages the glass seal faster. Call (844) 629-7617 for an exact quote – estimates are free.
Can my failed Mr-Glass window be repaired instead of replaced? Often yes. A fogged sealed unit, a broken lite, or worn rollers and weatherstrip can each be replaced on their own. Repairs are only possible when the frame is sound and the sash still moves freely; if the frame is warped or the opening out of square, a full replacement is the more reliable fix. Call (844) 629-7617 and we’ll tell you straight which you need.
How long does the swap take? A glass or hardware swap is usually a few hours for a single window, and most of our jobs are completed in a single visit. A full window replacement can run two to four hours per opening with the included measurement, reset and seal check. Call (844) 629-7617 to schedule and we’ll book the time your job actually needs.
How do you source the part for my Mr-Glass window? We read the manufacturer label and measure the unit, then match the sealed unit or hardware to your Mr-Glass model and profile before ordering. We carry no parts on a truck, which is why the measuring comes first – that’s how we avoid the wrong-size part and a second appointment. Call (844) 629-7617 for a free estimate.
Written by the team at TruePane Windows & Doors Enterprise, serving Enterprise and nearby areas.