Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateES Windows Impact Garage Doors: The Enterprise Owner’s Guide
We install impact-rated garage doors built to ES Windows opening specs for Enterprise homeowners, with most standard single-car installs landing between $1,450 and $2,850 and double-car doors between $2,300 and $4,400 depending on wind-load rating, glazing, and finish. Our technicians have up to 18 years of experience matching doors to existing ES Windows frames, and we install to the rated opening so the wind-load label on the door still means something.
How Enterprise owners usually find this page: the door binds in July when the slab swells in the heat, or a 60 mph gust rattles the panels and you notice daylight where the seal used to sit. Sometimes it’s simpler – the door that came with the house has lost its rating label, and your insurance carrier wants documentation before the next policy renewal. Whatever brought you here, the goal is the same door on the same opening with the rating intact.
Which ES Windows Models This Applies To
ES Windows builds impact garage doors across their residential impact line, and the door you have determines which replacement panels, hinges, rollers, and seals actually fit. Look for the manufacturer label on the inside face of the door or the jamb – it lists the series, the design pressure (DP) rating, and the wind-load zone. That label is the single most useful thing you can photograph before calling, because a DP-50 door and a DP-65 door are not interchangeable even if they look identical from the curb.
Two compatibility points that trip people up in Enterprise. First, ES Windows impact doors are often installed with a specific track radius and header configuration that aftermarket doors don’t automatically match; we measure the existing opening and the radius before quoting. Second, the glazing in ES impact panels is set in a specific frame extrusion, so matching a single damaged section to the rest of the door means matching the extrusion, not just the glass size. On the OEM-vs-aftermarket decision: OEM panels keep an exact match and the label trail intact; quality aftermarket equivalents run 20 to 30 percent less and hold their own rating, but you’ll want the paperwork on hand for insurance. We quote both on paper side by side so you can see what you’re actually buying. Our company is an independent service provider, not affiliated with ES Windows.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your ES Windows Impact Garage Doors Is Failing
- The door binds or scrapes in summer. Enterprise heat expands the door slab and the jamb, and a bottom seal that’s already compressed will drag. When the door only sticks from June through September, the seal and the track alignment are usually the culprit, not the door itself.
- Daylight or a draft at the perimeter. The perimeter seal has taken a set or split. In an impact door this matters more than on a standard door, because the seal is part of what keeps wind-driven rain out during a monsoon push.
- Panel delamination or a soft spot near the bottom rail. Moisture gets behind the skin when the bottom seal fails, and the core soaks it up. By the time it looks puffy, the panel is usually past repair.
- The wind-load label is missing or unreadable. Labels fade in Nevada sun. Without a legible rating label, you can’t document the door for insurance or resale, and a carrier may treat the opening as unrated.
- Rollers or hinges worn and noisy. The hardware wears first, and a dragging roller loads the door unevenly. On an impact door that extra stress reaches the panel joints, which is exactly where a rated assembly doesn’t want it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing in Enterprise runs roughly $1,450 to $2,850 for a single-car impact door and $2,300 to $4,400 for a double. What moves the number: the DP rating you need for your wind zone, whether the door has vision lites or full glass, the finish, and whether the opening needs new track or a header adjustment. Hardware-only repairs – rollers, hinges, a bottom seal – typically run $180 to $420 in parts and labor, and we quote those separately so you can see whether the door is worth saving.
Every quote is written line by line, parts and labor split out, with no change orders after the fact. The Keystone Standard means we register both manufacturer warranty layers in writing, with durations stated, before we leave the driveway, and the 90-Day Done Right Promise covers the install itself – if something isn’t right, we make it right without a paperwork fight.
DIY or Call Us?
You can safely check the label, wipe it clean and photograph it. You can run a straightedge along the bottom seal to see if it’s compressed flat. You can look at the hinges and rollers for rust, flat spots, or a door that’s clearly hanging crooked in the track. Those checks cost nothing and give us a head start on the quote.
What you shouldn’t do yourself is replace the torsion spring, the cables, or the bottom brackets, or attempt to remove a panel from an assembled door. Torsion springs hold enough stored force to break a wrist or worse, and impact panels are heavier and mounted under more tension than standard ones – a mistake here isn’t a bad afternoon, it’s an emergency room visit. There’s also the rating question: a door reassembled by hand can lose its wind-load performance, and you won’t know until a storm tests it. Call (844) 629-7617 and let a trained technician take it from there.
FAQs
Expect 15 to 20 years for the door structure, though the hardware – rollers, hinges, seals – typically needs service every 5 to 7 years. Enterprise sun and summer heat cycle the door and seal harder than a milder climate, so seal wear shows up sooner here; calling for an inspection when you notice the first drag will extend the door’s life noticeably.
Often yes. Worn rollers, hinges, bottom seals, and misaligned track are all repair items, and they’re a fraction of a full replacement. Replacement makes more sense when a panel has delaminated, the label is gone, or the wind-load rating no longer matches what your insurance carrier wants. Call (844) 629-7617 and we’ll tell you honestly which side of that line you’re on.
A single-car impact door swap runs about 4 to 6 hours with two technicians on site; a double runs 6 to 8. We quote the window on paper before we start, we work clean, and we don’t leave the opening hanging into a second appointment. Most Enterprise jobs are done in a single visit.
We source through authorized manufacturer channels and match against your door’s label and measurements so the rating stays documented. We don’t carry stock and we don’t show up with parts preloaded on a truck – what we do is measure the opening twice, quote manufacturer options and quality aftermarket equivalents side by side, and order exactly what fits your ES Windows door. Call (844) 629-7617 to schedule a free estimate, and have that label photo ready. We also service PGT, CGI, and CWS impact products.
Written by the team at TruePane Windows & Doors Enterprise, serving Enterprise and nearby areas.