Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Window Replacement: The Enterprise Owner’s Guide
We install CGI-compatible window replacements and complete CGI window replacements for homeowners here in Enterprise, NV. Most single-window replacements land between $650 and $1,450 installed, depending on the series and the size of the opening, and a full-house job usually runs $6,500 to $14,000. Same-day replacement is possible on standard sizes once we’ve confirmed your CGI model number, so it helps to have that sticker in hand when you call.
Owners in Enterprise usually discover the problem slowly. A horizontal slider starts dragging near the middle track. A vinyl frame that sat flush the first summer now shows a hairline crack at the sill after a run of 110-degree days. One morning the glass is fogged between the panes and no amount of wiping inside the house touches it. Whatever brought you here, the next step is the same: identify the CGI model and quote the replacement against a written scope.
Which CGI Models This Applies To
CGI makes a broad range of residential products, and knowing which line you have changes both the part and the price. The common residential lines you will run into in Enterprise are the CGI aluminum and vinyl single-hung, horizontal slider, and fixed picture windows under their residential series, plus patio doors. The model number is stamped on a decal, usually in the upper corner of the frame or the top or bottom of the sash, and it is the fastest path to an exact match.
If the decal is worn, measure the opening in three places per side (the rough opening rarely matches the frame). The width and height of the glass, the thickness of the frame, and whether it is single-hung or a slider are all you need to start. On the OEM-versus-aftermarket decision, we quote both on paper. OEM CGI-compatible hardware and sashes give you an exact cosmetic and spec match. A quality aftermarket sash from a manufacturer line we carry can save 15 to 25 percent. Either way, the warranty terms are registered in writing before we leave. We are an independent installer, not affiliated with CGI, so every quote names the manufacturer and the line it comes from.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your CGI Window Replacement Is Failing
- Fog or condensation between the panes. The seal on the insulated glass unit has failed, letting moisture in. Once the desiccant is saturated, wiping the inside of the room does nothing – the glass unit has to be replaced.
- A sash that binds or drags in summer. Vinyl and aluminum expand in the Enterprise heat, and a frame that was tight in winter can bow enough to catch on the track. Left alone, the operator and the sash both wear.
- Water staining or soft spots at the sill. Failed perimeter sealant lets monsoon rain sit against the frame. Sill rot and frame corrosion follow, and this is the one symptom that gets more expensive every month you wait.
- Drafting or heat pouring in at the edges. A worn weatherstripping or gasket, or a sash that no longer seats square, lets the conditioned air out. You’ll notice it most on the west and south elevations.
- Rattling or squealing on the track. The rollers or glides have worn flat or the track has pitted. It is a small part now and a whole sash later.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Enterprise, a standard single-hung or slider replacement installed runs $650 to $1,450 per window. That covers the glass and sash, the frame, the hardware, removal and haul-away of the old unit, flashing and sealant, and finishing. What pushes a job toward the top of that range: impact-rated glass, oversized openings, a second-story install, or custom sizes. A patio door runs higher.
| Item | Installed Range |
|---|---|
| Single-hung or slider (standard size) | $650 – $1,100 |
| Fixed picture or large double-hung | $900 – $1,450 |
| Impact-rated glass upgrade | $150 – $400 add |
| Full-house replacement (10 – 15 windows) | $6,500 – $14,000 |
We quote a written line-item price – parts and labor separated so you see exactly what you’re buying. The 90-Day Done Right Promise covers the workmanship, and both manufacturer warranty layers are registered in writing before the truck leaves. No surprise line items, no second appointment left hanging.
DIY or Call Us?
There is real overhead in replacing a window yourself. You can safely check the model decal, measure the opening, and test whether the sash moves true. What you cannot safely tend to alone is the glazing and the install: setting a heavy sash into a rough opening, getting the flashing and perimeter seal right so monsoon water does not get behind the frame, and knowing whether impact-rated glass is required. Get the flashing wrong and the wall gets wet. Get the level wrong and the sash binds by July. Those are expensive mistakes to undo.
We do this all day in Enterprise, and we’re honest about what’s worth a DIY attempt – very little on a full replacement. Call (844) 629-7617 and we’ll give you a written price against your CGI model. The estimate is free.
FAQs
A well-installed vinyl or aluminum CGI window typically gives you 15 to 25 years in southern Nevada, less on south- and west-facing walls where UV and heat do the most damage. The glass seal is usually the first thing to go, often between year 10 and year 15.
Sometimes. A fogged glass unit can often be replaced without replacing the whole window, and a worn operator or roller can be swapped alone. A cracked frame or a rotten sill means the whole unit goes. We’ll tell you which one you’re looking at on the estimate.
A single standard window is usually a same-day job, and a full-house replacement takes one to two days depending on how many openings and whether any framing needs repair. We confirm the schedule in writing before we start.
We match your CGI model number to the manufacturer line and quote OEM and quality aftermarket side by side on paper. You see the source, the warranty, and the price before you decide.
Written by the team at TruePane Windows & Doors Enterprise, serving Enterprise and nearby areas.