Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Custom Windows & Doors in Enterprise: What to Know First
TruePane Windows & Doors Enterprise provides independent CGI custom windows and doors for homeowners in Enterprise, Nevada, and most custom CGI orders we quote are measured within a week and installed in four to eight weeks depending on the series and finish. We’re an independent CGI service provider, not a dealer tied to one factory, so we quote manufacturer lines side by side on paper. Pricing is upfront and written, and custom work is never the cheapest bid in the room.
This page is for the CGI owner in Enterprise whose windows have fogged, whose patio door drags in July, or who wants a custom opening built to the house instead of a stock size forced into it. If that’s you, call (844) 629-7617. A live person answers.
Key Takeaways
- CGI makes good vinyl and aluminum products; the failures we see in Enterprise are usually installation and sealing problems, not factory defects.
- Most custom CGI orders run four to eight weeks from signed measure to install day.
- The Keystone Standard applies here: both warranty layers registered in writing, durations stated, before we leave.
How CGI Products Fail – and How We Fix Them
CGI builds a wide range of vinyl and aluminum lines, and the failures that show up in Enterprise homes are consistent enough that we can usually name the cause from the driveway. Here are the five we see most on CGI custom windows and doors.
- Fogged insulating glass units. Common on CGI vinyl double-hung and slider series where the sealed unit loses its desiccant seal. In Enterprise, the swing from 105-degree afternoons to cool desert nights stresses that seal faster than a stable climate would. The fix is a new sealed unit set into the existing sash, not a whole-window replacement, when the frame and sash are sound. We check the frame before we quote the glass.
- Patio and sliding doors that bind at the sill. The CGI sliding door track and roller assembly takes the load, and rollers wear flat while the track collects desert grit. That’s why the door drags in summer and frees up in winter. We replace rollers and rebuild the track rather than selling the homeowner a new door they don’t need.
- Air and water intrusion at the perimeter. This is almost never the CGI product. It’s the original installation: missing backer rod, a bead of caulk doing the work of a proper flashing layer, or a rough opening framed out of square. We pull the trim, correct the flashing and shims, reseal, and re-trim. An out-of-true opening is the single most common reason a good window performs poorly in Enterprise.
- Condensation on the interior glass. CGI units are rated for a certain U-value, and if a homeowner went with a single-pane or low-performance option on a west-facing wall, the inside face will sweat whenever the air conditioning runs hard. Replacing the glass pack with a low-E, argon-filled unit is the fix when the frame allows it.
- Latch and lock hardware that loosens. The multipoint hardware on CGI casement and awning lines can loosen at the keeper screws after years of use. That’s a hardware replacement, not a window replacement, and it takes a short visit with the right OEM or matching aftermarket part.
One thing worth knowing that CGI’s own materials won’t tell you: the fogging that shows up on a CGI slider in Enterprise is often the same unit that passed inspection at install. The seal fails years later, and the cause is thermal cycling, not a factory mistake. That distinction matters, because it changes whether the repair is covered under warranty or an out-of-pocket glass replacement, and we’ll tell you which one you’re looking at before you commit to either.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CGI Custom Windows & Doors Process
A CGI job in Enterprise runs on the same steps every time, because a custom window or door is only as good as the measurement and the setting.
- 1
Diagnostics at the house. We measure every opening twice, check the frame for plumb and square, and identify the CGI series so we know which parts and glass specs apply.
- 2
Parts decision on paper. Where a repair is possible, we lay out OEM CGI parts next to quality aftermarket equivalents and show the difference in cost, fit, and warranty impact. You see both before you choose.
- 3
Custom quote. For a new custom window or door, we quote manufacturer lines side by side so you can see exactly what you’re buying. Upfront, written, no change-order surprises.
- 4
Install or repair. Background-checked, uniformed technicians set the unit with proper flashing, shimming, and sealing, or complete the repair to the existing CGI frame.
- 5
Testing before we leave. We operate the hardware, check the seal, and confirm the door or window opens and closes with no bind.
- 6
Warranty registration and cleanup. The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, and the site cleaned up. The 90-Day Done Right Promise covers the workmanship.
See the difference
Before
After
Before
After
Before
AfterWhat CGI Custom Windows & Doors Costs in Enterprise
Here’s what CGI custom windows and doors actually run in Enterprise. These are honest ranges, not teaser pricing, and your exact quote comes in writing.
| Scenario | Typical Range |
|---|---|
| New sealed glass unit (fogged CGI double-hung or slider) | $260 – $520 per opening |
| Sliding patio door roller and track rebuild | $310 – $650 |
| Perimeter re-flash and reseal (air/water intrusion) | $420 – $900 |
| Hardware replacement (latch, lock, multipoint keeper) | $180 – $400 |
| Custom CGI window or door, supplied and installed | $1,150 – $4,800 per opening |
What moves the price: the CGI series, glass specification (low-E and argon add cost but earn it back in Enterprise summers), whether the rough opening needs correction, and the size and finish of a custom unit. Call (844) 629-7617 for an exact quote. Estimates are free, and we quote custom orders line by line.
Why Enterprise Homeowners Call TruePane Windows & Doors Enterprise for CGI Work
An independent CGI service provider means we aren’t locked into one factory’s answer, so you get the fix that fits your CGI product and your budget. Our technicians have up to 18 years of experience with CGI lines and the rest of the field, and we install for more than a dozen manufacturers, including PGT, CWS, ES Windows, and ECO Window Systems, so if a repair or a custom order calls for another brand, we’ll tell you plainly.
Every CGI job in Enterprise is covered by the 90-Day Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated. A live person answers the phone 24 hours a day, and if the job needs a second look, we’re the ones who come back. If the pane is not true, the job is not done. We stand behind the work, the warranty, and the promise, in writing.
TruePane Windows & Doors Enterprise is one brand-service page in a broader set. We also service PGT, CWS, ES Windows, and ECO Window Systems.
FAQs
Yes. We diagnose the issue, identify which layer of the CGI warranty the problem falls under, and register both manufacturer layers in writing before the truck leaves the driveway. Call (844) 629-7617 and we’ll walk you through what’s covered.
Yes. As an independent CGI service provider, we source OEM parts where they’re the right call and matching aftermarket parts where they fit as well and cost less, and we show you both on paper. Call (844) 629-7617 for an exact quote.
Repair is usually the right answer when the frame and sash are sound and the problem is the glass unit, hardware, or roller assembly; replacement makes sense when the frame is out of square or the leak is in the rough opening. We measure and check before we recommend, and your options come to you in writing.
Custom CGI orders typically take four to eight weeks from signed measure to install day, depending on the series and finish, and repairs are usually handled in a single visit. Call (844) 629-7617 to schedule your free estimate.
No. We quote upfront and written, and we don’t add surprise line items after the job begins. If we find something during the work that changes the scope, you hear it from us before we proceed, not on the bill.
Written by the team at TruePane Windows & Doors Enterprise, serving Enterprise and nearby areas.