Horizontal roller
Single hung
Double hung
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateStyles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
See the difference
Before
After
Before
After
Before
AfterHorizontal Roller Windows in Enterprise, NV
Horizontal roller windows slide side-to-side on a track instead of cranking out or lifting up. One panel is fixed and the other glides past it, so you get a wide, unobstructed opening without a sash swinging into the room or out over the patio. In Enterprise, where summer heat pounds west-facing walls from May through September and monsoon dust finds every gap, that sliding design works hard for you: it seals tighter than a casement that warps out of square, and it opens in one easy motion for the cross-breeze that makes an evening bearable. If you’ve got a bedroom, kitchen sink, or family room wall that needs ventilation without the footprint of a swinging sash, this is usually the window we recommend.
TruePane Windows & Doors Enterprise installs horizontal rollers as part of our full Window Installation work, and we treat them with the same care we give every opening. We’re an authorized installer for more than a dozen manufacturer lines, including ES Windows and Mr-Glass, and every job is covered by the 90-Day Done Right Promise. Call (844) 629-7617 and a live person answers, day or night.
Here’s the thing about roller windows most people learn the hard way: the window itself is only half the job. The track, the sill, and the frame square are the other half. A roller that’s set even a quarter-inch out of true will drag, whistle in a wind, or let water pool at the sill during a monsoon downpour. Our technicians have up to 18 years of experience, and they measure every opening twice before anything gets ordered.
When You Need Horizontal Roller Windows
Homeowners across Enterprise call us about roller windows for a handful of recurring reasons. See if any of these sound familiar.
- The window won’t slide anymore. Older rollers wear flat or the track fills with grit and the sash fights you every inch. In the older neighborhoods off Windmill Parkway, we regularly find original 1990s rollers that have ground themselves into the aluminum track.
- You feel heat radiating off the glass. Single-pane rollers on a west wall turn a family room into an oven by 3 p.m. A modern dual-pane unit with a low-E coating makes that wall usable again.
- Dust and fine grit collect on the sill after every wind. Enterprise sits close enough to open desert that wind-driven dust works into worn weatherstripping and tired seals. If you’re wiping the same sill every week, the seal is telling you something.
- The frame has gone out of square. Slab movement and years of sun can rack a window frame slightly, and a roller is unforgiving about it. The sash binds at the top corner or pops out of the track.
- You want ventilation without the swing. A casement or awning projects into the room or over a walkway. A roller slides flat and stays out of the way, which matters on a tight patio wall or above a kitchen counter.
- You’re matching windows to the rest of the house. If your home already has sliders, adding horizontal rollers keeps the look consistent instead of mixing styles on one elevation.
Our Horizontal Roller Windows Process
We keep the process plain and predictable. Here’s what a job with us looks like from the first call to the final walk-through.
- We measure the opening twice. Rough opening, frame square, sill level, and the depth of the existing wall. Rollers live or die on the track being true, so we check for racking and note anything that needs correcting before we order.
- We quote manufacturer lines side by side on paper. You’ll see ES Windows and Mr-Glass options with glass packages, screens, and hardware spelled out, so you know exactly what you’re buying and why the numbers differ. No verbal estimates that change at the bill.
- We set the frame square and level. We shim and fasten so the track runs flat and the sash glides on its own weight. We seal the sill and perimeter with the right flashing and caulk for our climate, not a generic bead that bakes off in the first summer.
- We hang the sash and test the glide. The panel should move with one finger and lock down snug. We adjust rollers, check the screen track, and confirm the weep holes drain.
- We register both warranty layers in writing before the truck leaves the driveway. That’s The Keystone Standard. Manufacturer coverage and our workmanship guarantee, durations stated, paperwork in your hand.
- We back it for 90 days. The Done Right Promise means if something isn’t right, we make it right. No paperwork fight, no argument.
Most roller jobs are completed in a single visit. We show up when we say, uniformed and background-checked, and we work in your home the way we’d work in our own mother’s.
Horizontal Roller Windows Pricing in Enterprise
Horizontal roller window replacement in Enterprise typically runs $450 to $1,100 per opening installed, depending on size, glass package, and whether the frame needs correction. A standard bedroom-sized dual-pane roller usually lands in the middle of that range. Here’s how the line items break down.
| Item | Typical Range |
|---|---|
| Standard dual-pane horizontal roller (installed) | $450 – $750 |
| Large or custom-size roller (installed) | $750 – $1,100 |
| Low-E / energy-efficient glass upgrade | Adds $60 – $150 per window |
| Frame squaring or sill repair | $100 – $300 per opening |
| Screen replacement | $30 – $70 |
What moves the price most: window size, the glass package (a low-E coating pays for itself on a west wall here), whether we’re working with an existing frame or doing a full-frame replacement, and how many windows you’re doing at once. A whole-wall project brings the per-window cost down.
We give no-hassle upfront pricing at the estimate. You’ll see manufacturer lines side by side on paper so you can weigh ES Windows against Mr-Glass or another line without guesswork. We also have standing offers: $50 off any repair over $250, an $89 Seasonal Tune-Up, and a permanent 5% discount for seniors and veterans. Estimates are free, and a live person answers the phone 24/7.
Is it cheaper to repair a roller window or replace it?
Repair usually wins when the frame is sound and only the rollers, track, or weatherstripping has failed; a roller and track service often runs $120 to $300. Replacement makes more sense when the glass is fogged, the frame is out of square, or the unit is a single-pane original that’s costing you on summer cooling. Our technicians will tell you which one you’re actually facing, and we don’t upsell a replacement you don’t need. Call (844) 629-7617 for an honest read.
FAQs – Horizontal Roller Windows
What is a horizontal roller window?
A horizontal roller window is a sliding window with two panels side by side: one fixed, one that rolls along a track to open. It opens left or right rather than up or out, so it takes no room inside or outside and gives you half the opening for ventilation. It’s a common choice for bedrooms, kitchens, and family rooms where you want airflow without a swinging sash.
How much do horizontal roller windows cost in Enterprise, NV?
Most horizontal roller windows in Enterprise cost between $450 and $1,100 per opening installed, with standard dual-pane units landing around $450 to $750 and large or custom sizes running higher. Energy-efficient glass and frame squaring add to the figure. Call (844) 629-7617 for an exact quote on your openings. Estimates are free and there’s no obligation.
Can you install horizontal roller windows in a single visit?
Yes, most roller window jobs are completed in a single visit. We measure ahead of time, order the correct units, and arrive prepared so we’re not leaving you with a half-finished wall. If a frame needs squaring or sill repair, we’ll tell you at the estimate rather than surprising you mid-job. Call (844) 629-7617 to schedule.
Do you offer energy-efficient glass for roller windows?
Yes. We offer low-E and dual-pane glass packages for horizontal rollers, which matter on the west- and south-facing walls that take the brunt of Enterprise sun. Better glass cuts heat gain and keeps rooms more even from morning to evening. We quote the glass options on paper so you can see the difference in cost and decide what’s worth it.
What warranty comes with a roller window install?
Every install is covered by The Keystone Standard and the 90-Day Done Right Promise. Both manufacturer warranty layers are registered in writing, with durations stated, before we leave, and our workmanship is guaranteed for 90 days with no paperwork fights. If something isn’t right, we make it right. Call (844) 629-7617 with any warranty question and a live person will answer.
Why Enterprise Homeowners Call TruePane
We’ve proudly served local communities for over 42 years through a heritage of craft and community commitment, and we hire local, training apprentices into journeymen because we plan to be in town in thirty years. We’re an authorized installer for more than a dozen manufacturer lines, with side-by-side quotes on paper so you see exactly what you’re buying. Our technicians are background-checked and uniformed, our pricing is upfront, and a real person answers the phone 24 hours a day, seven days a week. No call centers, no runaround.
For homeowners who want the wider picture on how windows fit a whole-house project, start with our home page and then look at the related work below. Sliding doors, energy-efficient upgrades, and full-frame replacement all sit alongside horizontal rollers in the same family of projects, and we handle them as one coordinated job when that makes sense.
Related work we do:
- Window Installation in Enterprise
- Energy-efficient windows in Enterprise
- Sliding and patio doors in Enterprise
- Impact windows in Enterprise
- Custom windows in Enterprise
- Glass railing systems in Enterprise
- Window repair in Enterprise
- Window installation in Henderson
- Window installation in North Las Vegas
- Window installation in Summerlin
- Window installation in Spring Valley
- Window maintenance guide
Get Your Free Estimate
If your roller windows drag, leak dust, or bake the room they’re in, it’s worth a look before the next summer. Call (844) 629-7617 for a free estimate. A live person answers around the clock, we’ll measure your openings, and we’ll quote manufacturer lines side by side on paper so you know exactly what a square deal looks like. If the pane isn’t true, the job isn’t done, and we stand behind every install in writing.
Written by the team at TruePane Windows & Doors Enterprise, serving Enterprise.