Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateES Windows Window Installation: The Enterprise Owner’s Guide
We install and service ES Windows products for Enterprise homeowners, and a full window replacement with ES Windows-compatible units generally lands between $650 and $1,400 per opening installed, depending on size, glass package, and how the existing frame is set. Most single-window jobs are completed in one visit. You usually find out something is wrong one of two ways: the glass fogs between the panes and stays that way through the dry months, or the sash stops sliding clean and starts binding before the summer heat hits.
TruePane Windows & Doors Enterprise is an independent service provider. We’re not affiliated with ES Windows, and we don’t claim to be. What we are is an authorized installer for more than a dozen manufacturer lines, ES Windows among them, and we’ve worked enough of their product in this valley to know where it fails and why.
Key Takeaways
- Installed ES Windows-compatible replacements in Enterprise run roughly $650 – $1,400 per window.
- Fogging between panes means a failed seal unit; binding means a track, roller, or frame-set problem.
- We measure every opening twice and quote manufacturer lines side by side on paper.
- Both warranty layers get registered in writing before the truck leaves your driveway.
- A live person answers the phone at (844) 629-7617, 24 hours a day.
Which ES Windows Models This Applies To
ES Windows has been a fixture in Florida and Gulf-state construction, and their product shows up in Enterprise in a mix of single-hung, horizontal slider, and fixed-picture configurations. The series plate is usually etched on the top or side of the sash, and the glass etch in the corner of the pane carries the manufacturer code and date of glass. If you can read either one, bring it to the call. We’d rather identify your unit from the plate than guess from a photo.
Here’s the compatibility gotcha worth knowing: ES Windows has changed sash profile dimensions across production runs, and a replacement sash that fits a later run won’t seat in an earlier frame without shimming or a full frame-out. We measure the rough opening and the sash pocket separately, twice, for exactly this reason. The other decision is OEM part versus a quality aftermarket equivalent. For ES Windows in particular, a matched aftermarket sash or seal unit often fits and performs the same at a lower price, provided the glass package and profile are spec’d correctly. We quote both on paper so you can see the difference rather than take our word for it. We don’t keep parts in stock and we don’t carry inventory on a truck; we source the right unit for your opening after measuring.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your ES Windows Window Installation Is Failing
- Fogging or condensation trapped between the panes. The insulated seal has failed and moisture has entered the air space. No amount of wiping fixes it from the inside.
- The sash binds or drags in the track. Usually worn rollers, a bent track, or a frame that was set slightly out of square and has shifted with thermal movement.
- Drafts or a visible gap at the frame edge. Sealant and gaskets break down faster than most owners expect in Nevada’s swing between cold nights and 100-degree afternoons.
- Water staining on the interior sill after a storm. Weepholes clogged with dust or a failed perimeter seal letting water past the frame.
- The lock won’t engage cleanly or the sash won’t seat flush. A sign the sash has warped or the frame has moved, which points to the installation as much as the window.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Enterprise, plan on roughly $650 to $1,400 per window installed, with most single units landing mid-range. What moves the number: window size and configuration, glass package (low-E and argon add cost but pay back in this climate), whether we’re swapping the sash only or doing a full frame-out, and how accessible the opening is from both sides.
- Single-hung or slider, standard glass: $650 – $950 installed
- Larger or picture units, upgraded glass: $950 – $1,400 installed
- Sash or seal-only replacement (where the frame is sound): quoted per opening after measurement
- Full frame-out and re-set: priced on inspection, quoted in writing before work starts
The price you get on paper is the price on the bill. No surprise line items. Every install carries the 90-Day Done Right Promise, and both manufacturer warranty layers are registered in writing before we leave. Ask about our $50 off any repair over $250, the $89 seasonal tune-up, and the standing 5% discount for seniors and veterans.
DIY or Call Us?
A homeowner can safely check a few things: clean the track and weepholes, test the lock and latch, look for gaps at the frame edge, and note whether the fogging is permanent or clears with weather. That’s diagnostics, not repair.
Where DIY goes wrong on windows is the re-set itself. A sash or frame set even slightly out of square will bind, leak, or fog again within a season, and getting it true takes a level, the right shim, and the know-how to read the opening. We’ve fixed plenty of jobs where a homeowner got the unit in and the seal failed by fall. That’s not a knock on anyone – it’s just what happens without the tools and the practice. If your ES Windows unit is fogging, binding, or leaking, call (844) 629-7617 and we’ll talk it through.
FAQs
Most insulated units last 15 to 25 years, though the seal between panes often fails sooner in this climate – the daily temperature swing between cold desert nights and hot afternoons works the seal harder than a steadier climate would. If your unit is past 15 years and fogging, replacement is usually the smarter spend.
Sometimes, yes. If the frame and sash are sound, a failed insulated seal unit can be replaced on its own, which costs less than a full window. We measure and quote that option first when it applies. Call (844) 629-7617 for a free estimate.
A single standard window replacement is typically a one-visit job. Larger units or full frame-outs may need a second visit, and we tell you which before we start so nothing is left hanging.
We identify your model from the sash plate or glass etch, measure the opening twice, and source the correct unit through our manufacturer relationships, quoting OEM and quality aftermarket equivalents side by side on paper. We don’t stock parts, so the right part gets ordered to your window, not pulled off a shelf.
We install PGT, CGI, and CWS as well, and quote lines side by side so you see exactly what you’re buying.
If your ES Windows window is fogging, binding, or letting in water, the sooner it’s addressed the less it costs to correct. Call (844) 629-7617 to schedule your free estimate in Enterprise. A live person answers, day or night, and there’s no pressure and no surprises on the bill.
Written by the team at TruePane Windows & Doors Enterprise, serving Enterprise and nearby areas.