Sliding glass doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Sliding & Patio Doors: The Enterprise Owner’s Guide
If your CGI sliding or patio door is sticking, whistling, or leaking, we install and service CGI-compatible doors and door components across Enterprise, with full sliding-door replacements typically landing between $2,400 and $6,800 installed depending on size, glass package, and frame material. Most service calls are scheduled within a few business days of your estimate, and single-visit repairs are common when the part is in hand. Owners usually discover the problem the same way: the door that used to glide with one finger now needs a shoulder, the rollers grind on the track, or a seal that used to sit tight now lets in the spring dust. We are an independent service provider and are not affiliated with CGI, but we’re an authorized installer for their line and know these doors well.
Which CGI Models This Applies To
CGI makes a broad family of sliding glass doors and patio doors across its residential lines, and the part you need depends heavily on the series and the vintage. Labels matter here. The manufacturer’s sticker is usually on the inside of the jamb or on the door panel edge itself, and it carries the series designation and a production code. Read that first before you order anything. On older CGI doors, we regularly find that the same nominal panel size was built with two different roller styles across production runs, so measuring the opening tells you less than reading the label. OEM parts fit correctly and keep the door’s tolerances intact; a quality aftermarket roller or seal can be a reasonable value on a door that’s near the end of its life, but we’re honest about when aftermarket sizing gets fussy. For most Enterprise owners who intend to stay put, we lean OEM because the door and the hardware were engineered together. We quote both on paper so you see the difference.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your CGI Sliding & Patio Doors Is Failing
Sliding and patio door failures follow patterns. Here’s what we look for and what each symptom usually means:
- The door drags or needs a shoulder to slide. The rollers have worn flat or the track has filled with grit and grit has scored the wheel. Both are common in Enterprise where fine desert dust works into the track and grinds the rollers down faster than in wetter climates.
- The door whistles or you feel a draft at the frame. The weather seal or sweep has hardened and shrunk. Intense summer heat and UV bake these seals brittle within a handful of years, and once they lose their compress they no longer block air or dust.
- Water pools on the interior track after a storm. The weep holes are clogged or the sill gasket has failed. Left alone, this is what rots the sill and softens the subfloor beneath the door.
- The door won’t latch or the lock feels loose. The door has dropped out of square on worn rollers, or the latch hardware has worn. A door that has dropped needs the rollers addressed, not just the latch.
- The glass has fogged between the panes. The insulated glass unit’s seal has failed. The door itself may be sound, but the glass needs replacing to restore the energy performance and the view.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s roughly what Enterprise owners can expect to pay, quoted as installed ranges rather than parts-only figures so there are no surprises on the bill:
| Service | Typical installed range |
|---|---|
| Roller replacement (per panel) | $120 – $260 |
| Weather seal / sweep replacement | $90 – $220 |
| Track cleaning and re-alignment | $110 – $240 |
| Insulated glass unit replacement | $380 – $900 |
| Full sliding door replacement | $2,400 – $6,800 |
The range is driven by panel size, whether the glass is standard or low-E, and how much of the frame needs rework. Every quote is line-item on paper, parts and labor shown separately, so you can see exactly what the work includes. Our work is covered by the 90-Day Done Right Promise, and we register both manufacturer warranty layers in writing before we leave. Standing offers apply: $50 off any repair over $250, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans.
DIY or Call Us?
Some of this you can safely handle yourself. Cleaning the track, vacuuming grit out of the rollers, and lubricating the rollers with a dry silicone spray are low-risk and often restore smooth travel. But roller replacement, track re-alignment, and glass or seal work on a sliding patio door involve removing a heavy panel and re-setting it plumb. A dropped or improperly re-seated panel binds, leaks, and can come off the track if it isn’t set true. On a door this size the panel is heavy enough to cause injury if it slips, and a bad re-set will cost more to correct than the original repair. That’s the point where a trained, background-checked technician saves you money. Call (844) 629-7617 and we’ll talk through what’s happening and whether it’s a quick fix or a full service visit.
FAQs
How long do CGI sliding and patio door components last in Enterprise? In our Nevada climate, rollers and weather seals typically wear in the six-to-twelve-year range rather than the decade-plus you’d get in milder parts of the country, because the heat, UV, and blowing dust all shorten hardware life. The door frame and glass often last far longer than the rollers and seals.
Can this be repaired instead of replaced? Yes in most cases. Worn rollers, sweeps, seals, and fogged glass can be replaced on the existing door without a full replacement, and we tell you plainly when a repair is the better value versus when replacement makes sense. Call (844) 629-7617 for a straight answer.
How long does the swap take? A roller, seal, or track repair is usually completed in a single visit, typically an hour or two. Full door replacement takes longer depending on the size and how much frame work is needed. We’ll give you a realistic timeline with your quote, not a guess.
How do you source the right part for my CGI door? We read the series and production code off your door’s label first, confirm the roller or seal style against the specific series, and quote OEM versus quality aftermarket side by side on paper so you decide with the facts. Call (844) 629-7617 to get started.
Call (844) 629-7617 for a free estimate. We’re an authorized installer with side-by-side quotes, The Keystone Standard warranty registration in writing, and the 90-Day Done Right Promise behind every Enterprise job. When you call, a live person answers, day or night.
Written by the team at TruePane Windows & Doors Enterprise, serving Enterprise and nearby areas.