Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Impact Windows & Doors in Enterprise: What to Know First
CGI impact windows and doors in Enterprise are typically installed, replaced, or repaired on a two-to-four-week turnaround once measurements and a written quote are in hand, and most single-window service calls finish in one visit. Replacement pricing runs roughly $650 to $1,900 per window depending on series and size, and we quote it in writing before any work starts. As an independent CGI service provider, we work on CGI products but are not affiliated with or authorized by the manufacturer.
This page is for Enterprise homeowners who already have CGI impact windows or doors in the house, or who are weighing CGI against other lines for a replacement. We’re TruePane Windows & Doors Enterprise, and we install and service CGI alongside more than a dozen other manufacturer lines, including PGT, CWS, ES Windows, and ECO Window Systems. If you have a fogged unit, a door that drags, or a quote you want a second set of eyes on, call (844) 629-7617. A live person answers, day or night.
Key Takeaways
- CGI impact products are common in Enterprise homes, and most service needs fall into five predictable failure modes we can name before we knock.
- We quote manufacturer lines side by side on paper, so you see exactly what you’re buying.
- Both warranty layers get registered in writing before the truck leaves your driveway.
- Every job is backed by our 90-Day Done Right Promise.
- Free estimates, no surprise line items on the bill.
How CGI Products Fail – and How We Fix Them
CGI builds to Florida impact standards, which is exactly what makes their failures distinctive from what we see on other brands. In Enterprise these are the five patterns that come up most on a CGI job.
- Seal failure and fogging on double-hung and single-hung impact units. The insulated glass unit on CGI’s vinyl impact lines can lose its perimeter seal after years of desert sun and the daily temperature swing between a cold night and a hot afternoon. Once the seal goes, you get haze between the panes that no amount of cleaning touches. We replace the IGU rather than sell you a whole window, provided the frame and sash are sound. That’s a warranty-safe repair when done with a matched unit, and it’s the difference between a few hundred dollars and a few thousand.
- Sliding and horizontal roller units that stop locking. On CGI horizontal roller and slider impact units, the latch on the meeting rail depends on the panels meeting at a fixed tolerance. When the roller wheels wear or the track fills with grit and sand carried in on Enterprise wind, the panels ride a little low and the lock won’t catch. Most people assume the lock is broken. Usually the fix is new rollers, a track clean, and a re-alignment of the panel. We check the lock last, not first.
- Water intrusion at the sill on impact doors. CGI impact patio and entry doors rely on a weep and drainage path under the sill. When that path clogs or the sill has settled out of level on an older slab, water finds the interior during a monsoon. We inspect the sill and drainage before assuming the door itself is at fault, and we correct the drainage rather than caulk over it.
- Vinyl frame distortion on south- and west-facing elevations. Dark vinyl CGI impact frames take direct sun on an Enterprise west wall all afternoon. Over years the frame can bow enough that a sash binds and the weatherstrip loses contact. That’s not a defect you can argue your way out of with caulk. We measure for distortion, confirm whether the frame is out of true, and quote the honest fix rather than reseal a window that will fail again next summer.
- Failed or worn weatherstrip and hardware on impact windows. The seals and latch hardware on any impact product take a beating in dry heat. When the weatherstrip hardens or the hardware loses tension, the impact rating of the assembly is compromised because the unit no longer closes to its design tolerance. We replace with OEM hardware where it’s available and a quality aftermarket match where it isn’t, and we tell you which one we’re using and why.
One thing you can’t get from CGI’s own literature: the fogging pattern on a failed impact IGU in Enterprise often shows up first on the upper corner of the sun-facing pane, not the whole unit at once. If you see a small fogged patch in one corner after a cold morning, the seal has started to go. Catching it in that window means a glass swap instead of a full unit replacement later.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Our CGI Impact Windows & Doors Process
Every CGI job runs the same way, whether it’s a single repair or a full replacement across the house.
- 1
Diagnose. We measure every opening twice and identify the actual failure, not just the symptom. A binding sash is diagnosed for frame distortion, and a fogged unit is checked for seal failure versus a leak at the glazing.
- 2
Decide the parts. We lay out the OEM versus aftermarket choice for hardware and seals on paper, so you see the cost and the trade-off side by side before you commit. Some CGI hardware is OEM-only for a given series; we tell you when it is.
- 3
Install or repair. Impact windows and doors go in to the manufacturer’s tolerances, with attention to the anchorage and the seal path that the impact rating depends on. A window is only impact-rated if it’s set true.
- 4
Test. We operate the sash, door, or slider through its full range, check the lock and latch engagement, and confirm the drainage path on doors. A door that binds in July is a door we haven’t finished.
- 5
Register the warranty. Both manufacturer warranty layers get registered in writing, with durations stated, before the truck leaves your driveway. That’s The Keystone Standard.
- 6
Clean up and back it up. We leave the opening clean and the work covered by our 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat CGI Impact Windows & Doors Costs in Enterprise
| Job | Typical range |
|---|---|
| Repair of one CGI impact window (hardware, weatherstrip, alignment) | $180 – $420 |
| Insulated glass unit (IGU) replacement on a CGI double-hung or single-hung impact window | $320 – $650 |
| New CGI single-hung or double-hung impact window, installed | $650 – $1,300 per window |
| CGI horizontal roller or sliding impact window, installed | $750 – $1,500 per window |
| CGI impact entry or patio door, installed | $1,800 – $4,200 |
What moves the price: the CGI series, the size and configuration of the opening, whether a frame is distorted and needs correction, and how many openings you’re doing at once. A single-unit glass swap sits at the low end. A full replacement with frame correction and a door sits at the high end. We quote line by line in writing, and the number on the paper is the number on the bill. Call (844) 629-7617 for a free estimate.
Why Enterprise Homeowners Call TruePane Windows & Doors Enterprise for CGI Work
The reason people call us on a CGI job is simple: we know the product line and we put the warranty in writing. We’ve been proud to serve local communities for over 42 years, and our technicians have up to 18 years of experience on impact windows and doors. Every install and every repair is backed by our 90-Day Done Right Promise and The Keystone Standard, and both warranty layers get registered before we leave.
We hire local, train apprentices into journeymen, and plan to be in Enterprise in thirty years, which is why a callback is a routine call and not a fight. Our technicians are background-checked and uniformed, and they measure every opening twice. When you’re comparing CGI against other lines, we install more than a dozen manufacturer products and can quote PGT, CWS, ES Windows, and ECO Window Systems alongside CGI on the same page, so you see the real trade-off. No-hassle upfront pricing, most jobs completed in a single visit, and a permanent 5% discount for seniors and veterans. If the pane isn’t true, the job isn’t done.
FAQs
Yes. CGI builds impact products to Florida impact standards, and they hold up well in Enterprise when they’re installed true and the seals are maintained. The brand isn’t the weak link; the install and the aging seal are. Call (844) 629-7617 to talk through a specific CGI window in your home.
Usually, yes. OEM hardware, weatherstrip, and matched glass units are available for most CGI impact series, though some older or discontinued series require a quality aftermarket match. We tell you which one we’re using and why before we order. Call (844) 629-7617 for a free parts check.
Repair the unit if the frame and sash are true and only the seal or hardware has failed; replace it if the frame is distorted or the glass is compromised past the point of a match. A corner-fogged IGU is usually a repair. A bowed west-facing frame is usually a replacement. Call (844) 629-7617 and we’ll give you the straight answer on your window.
Most single-window service calls are done in one visit once we’ve measured and quoted, and full replacements typically run two to four weeks from written quote to install. We won’t promise a date we can’t hold. Call (844) 629-7617 for a free estimate.
Yes. That’s The Keystone Standard, and it’s not a verbal promise. Both manufacturer warranty layers are registered in writing with durations stated before our technicians leave your driveway on any CGI job in Enterprise. Call (844) 629-7617 with any warranty question.
If you have a CGI impact window fogging at the corner, a slider that won’t lock, or a west-facing frame that’s binding, the fix starts with a free estimate. Call TruePane Windows & Doors Enterprise at (844) 629-7617. A live person answers 24 hours a day, 7 days a week, and we’ll quote it in writing, register both warranty layers, and stand behind the work with our 90-Day Done Right Promise. Seniors and veterans get a permanent 5% discount on the work.
Written by the team at TruePane Windows & Doors Enterprise, serving Enterprise and nearby areas.