Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateCGI Door Installation: The Enterprise Owner’s Guide
CGI door installation in Enterprise typically runs $650 to $1,900 per opening installed, depending on door series, glass package and whether the rough opening needs work, and most of these jobs are completed in a single visit with a written line-item quote up front. Owners usually find us the same way: a patio door that drags on the track every July, a hinge-side jamb that has pulled loose from the framing, or fog trapped between panes of a CGI slider that was supposed to last another decade. Enterprise sits at roughly 2,200 feet with summer highs that push 105°F and a monsoon season that drives rain sideways against east- and south-facing walls, and that cycle is what wears out seals, fasteners and thresholds faster than the manufacturer’s spec sheet anticipates.
Which CGI Models This Applies To
CGI makes several residential lines, and the part you need is tied to the series, not just the brand. The most common doors we see in Enterprise are CGI aluminum patio sliders and swing doors from their Window and Door Series, which share frame profiles and roller hardware across a range of widths but not across every series. Before you order anything, find the manufacturer’s sticker on the top or side of the door panel or inside the jamb. It lists the series code, the panel size and the glass build date. If the sticker is gone, we measure the panel width, height and track depth ourselves.
The OEM-versus-aftermarket decision matters here. CGI replacement rollers, hinge sets, weatherstripping and threshold caps are available from the manufacturer, and for structural or warranty-sensitive parts we recommend OEM. For common wear items like rollers, sweep seals and glazing tape, quality aftermarket equivalents match the spec at lower cost, and we quote both on paper so you can see the difference. TruePane Windows & Doors Enterprise is an independent service provider, not affiliated with CGI, and we source parts by model number, never by guesswork.
Styles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
Signs Your CGI Door Installation Is Failing
These are the failures we see most in Enterprise, and what is actually happening underneath each one:
- The door drags or rubs the jamb in summer. Aluminum frames expand with heat, and when the installer set the door tight to the opening with no allowance, that expansion shows up as binding. The door is telling you the shim and fastener pattern needs correction, not that the frame is bent.
- Fog between the panes. That is a failed insulated glass seal, not condensation. Once the desiccant saturates, the unit will not clear, and in Enterprise’s temperature swing the seal fails faster on west-facing doors that bake all afternoon.
- Water on the interior threshold after monsoon rain. Usually the sweep or the sill pan drainage, and often both. A door that leaks through the sill will eventually rot the framing beneath the threshold, which turns a weatherstripping job into a rough-opening repair.
- Loose hinges and screws that will not hold torque. On a hollow jamb this means the fastener has stripped. Replacing with a longer screw is a temporary fix; the real repair adds backing or replaces the jamb section.
- Rollers that grind or the panel jumps the track. The roller wheel has worn flat or the track has a dented spot. Left alone, a jumped panel can crack the glass or bend the frame beyond reuse.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing in Enterprise for CGI-compatible door work breaks down roughly like this:
- Roller and hardware replacement on a patio slider: $180 to $340, including labor.
- Weatherstripping, sweep and threshold cap: $220 to $450.
- Insulated glass unit replacement (per panel): $350 to $720, depending on glass package and size.
- Hinge and jamb repair on a swing door: $280 to $550.
- Full door replacement, standard size: $650 to $1,900 installed.
The range is driven by door series, glass options (impact-rated glass and low-E coatings cost more), and whether the rough opening needs repair once we get the old unit out. Every quote is written line-item and fixed before we start, so the number on the estimate is the number on the bill. The work is covered by our 90-Day Done Right Promise, and under The Keystone Standard we register both manufacturer warranty layers in writing, with durations stated, before we leave. Standing offers include $50 off any repair over $250 and a permanent 5% discount for seniors and veterans.
DIY or Call Us?
Some checks are safe and worth doing yourself. Look for the manufacturer’s sticker, clean the track and vacuum the roller wells, tighten hinge screws that have backed out, and note exactly where the door drags or leaks. Write down the model number and the measurement from panel edge to panel edge. That is homeowner work.
Replacing rollers on a loaded slider panel, resetting a jamb that has pulled from framing, or swapping an insulated glass unit is where DIY goes wrong. A 4-by-8 foot glass panel is heavy, awkward and unforgiving if it slips, and a jamb reset done without proper shimming will bind again the first hot week. These are not the tasks to learn on. Call (844) 629-7617 and we will tell you which category your door falls into before we send anyone out. Live person answers, day or night.
FAQs
How long do CGI doors last in Enterprise? Most last 15 to 25 years, but weatherstripping and rollers wear out in 5 to 10 in our climate, and a west-facing door with direct summer sun will need its first seal work sooner than a shaded one.
Can a failing door be repaired instead of replaced? Often yes. Rollers, sweeps, weatherstripping and glass units are all replaceable, and repair is worth it when the frame is square and the glass is sound. If the frame is bent or the sill is rotted, replacement is the honest answer.
How long does the swap take? Hardware and weatherstripping work is usually done in one visit of two to four hours. A full door replacement takes most of a day, and we do not leave a job half-finished to come back later.
How do you source the right part? By CGI model number and series code from your door’s sticker, or by measurement when the sticker is gone. We quote OEM and quality aftermarket options side by side on paper so you can see the cost and spec difference.
Written by the team at TruePane Windows & Doors Enterprise, serving Enterprise and nearby areas.
We work on CGI doors alongside PGT, CWS and ES Windows products across Enterprise, and our technicians bring up to 18 years of experience to every install and repair. If your door is telling you something, call (844) 629-7617 for a free estimate, a written quote and a crew that will show up when we said we would. Done right the first time, and we stand behind it in writing.