Impact garage doors
Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateStyles & brands we work with
- Single hung
- Double hung
- Horizontal roller
- Casement
- Bay & bow
- Sliding glass doors
- Entry doors
- Impact garage doors
- PGT
- CGI
See the difference
Before
After
Before
After
Before
AfterHow Much Does Impact Window Installation Cost in Enterprise?
Impact window installation in Enterprise typically runs $650 to $1,450 per window installed, with most whole-house jobs landing between $9,500 and $28,000 depending on window count, size, and frame material. A single standard bedroom slider in a Green Valley Ranch tract home usually comes in around $850, while a large custom picture window with laminated glass in a Seven Hills two-story runs closer to $1,900. Those figures include the window, the install labor, and both warranty registrations in writing.
Enterprise sits in the Las Vegas Valley’s south-central corridor, and that location matters for pricing. Homes along the 215 Beltway and around Mountain’s Edge face afternoon sun angles that push homeowners toward higher-rated laminated glass, which adds cost. But the bigger driver here is the Clark County windborne debris code that governs most of this zip. We quote every window on paper, side by side across manufacturers, so you see exactly what the number buys before you commit.
The short answer for the person who just wants the figure: budget $1,000 per opening as a working average for impact-rated windows in Enterprise, then adjust up or down based on the factors below. Call (844) 629-7617 for a free in-home measure and a firm number.
Key Takeaways
- Average installed cost in Enterprise: $650-$1,450 per window.
- Whole-home impact replacement: $9,500-$28,000 for a typical 12-20 window house.
- Laminated impact glass, not tempered, is what carries the code rating here.
- Frame material swings the price more than glass does: vinyl on the low end, aluminum and wood-clad higher.
- Most single-visit jobs are done in one day with our technicians, who have up to 18 years of experience.
Impact Window Installation Cost Breakdown (2026)
Here is how the number breaks down line by line for the Enterprise market. These ranges reflect what we quote across more than a dozen manufacturer lines, including Andersen, Pella, Marvin, Milgard, PGT, and CGI. A square deal means every line is on the paper before we start.
| Line Item | Typical Enterprise Range | Notes |
|---|---|---|
| Standard impact window (vinyl frame, fixed or single-hung) | $650 – $950 installed | Most common in Green Valley and Silverado Ranch homes |
| Operating impact window (casement, slider, awning) | $850 – $1,250 installed | Hardware and mechanism add cost |
| Large or custom picture window | $1,200 – $1,900 installed | Size and laminated glass rating drive the upper end |
| Aluminum frame upgrade | +$150 – $400 per window | Popular in modern Seven Hills builds |
| Wood-clad or premium line | +$400 – $900 per window | Marvin and Pella premium series |
| Second-story access or scaffold | +$75 – $250 per window | Two-story stucco homes near the 215 |
| Stucco trim repair and reseal | $100 – $300 per opening | Common in older Enterprise neighborhoods |
| Permit filing | $150 – $450 per job | Clark County requires it on structural replacement |
| Old window removal and haul-away | Included in most quotes | Confirm it is on the paper |
What pushes the price up: larger openings, premium frame materials, second-story access, and any rot or stucco damage found once the old frame comes out. What pulls it down: standard sizes, single-story access, vinyl frames, and a job with six or more windows where the per-unit labor drops. The glass itself is the least negotiable part of the cost here because laminate is what earns the rating.
If you want the full picture of how we set a window and register the warranty, the impact window installation in Enterprise page walks through the job from measure to final seal. We measure every opening twice before anything is ordered.
What Affects Impact Window Installation Pricing in Enterprise
Five factors move the number more than anything else in this market. Understanding them now saves a surprise on the bill later.
- Contractor labor and pricing: A contractor’s pricing varies with demand for impact work. Non-owner-occupied flips and builders absorb a lot of capacity in peak season, so established contractors who answer the phone and register warranties tend to price at the higher end. The tradeoff is who shows up and who fields the callback.
- Home age and structure: A 1990s Silverado Ranch home and a newer Mountain’s Edge build have different opening depths and framing. Older stucco often needs trim work once the old window comes out, and that adds $100-$300 per opening.
- Glass and impact rating: Laminated glass with the right impact rating costs more than standard insulated glass. This is not a place to save, since the code rating in this zone is the whole point of the purchase.
- Number of windows: Six or more windows per job usually drops the per-window price because labor is spread across the day. A single window carries a minimum trip cost.
- Access and height: Second-story windows, tight side yards, and pool-cage obstructions add access charges. Steep or tall work needs proper scaffolding, and we build that into the quote rather than adding it later.
- Permits: Clark County requires permitting on structural window replacement. We file it, and the fee appears on the quote as its own line.
One thing that does not belong on a window quote: anything you cannot read. We quote manufacturer lines side by side on paper for a reason. When the homeowner sees the Andersen number next to the Milgard number next to the PGT number, they stop guessing and start choosing.
How to Save on Impact Window Installation
There is no honest way to make impact windows cheap, but there are real ways to make the total lower without gutting the job. Here is what actually works in Enterprise.
- Bundle the whole house in one job. A 16-window job costs meaningfully less per window than four separate four-window jobs. The trip, the permit, and the setup get shared across the work.
- Choose standard sizes where you can. Custom sizing is sometimes unavoidable, but a standard opening that fits a stock unit saves real money on the window itself.
- Stick with vinyl on the right homes. Vinyl impact frames perform well in this climate and cost less than aluminum or wood-clad. Aluminum is a look, not a necessity, unless you want it.
- Use the standing offers. We keep three standing offers: $50 off any repair over $250, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. If you qualify for the veteran or senior discount, ask for it before we quote.
- Get the estimate before you decide anything. The free in-home measure is where the guesswork ends. Call (844) 629-7617 and a live person answers, any hour.
Avoid anyone who quotes a price per window over the phone without measuring. Rough numbers are fine as a starting point, which is what this page is for, but an impact window that is ordered to the wrong dimension is a problem that costs everyone. We measure every opening twice. That is not ceremony; it is the reason a job finishes in one visit.
For related work, the home page links to our full range of window and door services, and our team can quote windows and patio doors together so the sealed envelope is consistent across the back of the house.
FAQs – Impact Window Installation Cost
How much does it cost to install impact windows in Enterprise, NV?
Most Enterprise homeowners pay $650 to $1,450 per window installed, and a full 12-20 window house runs $9,500 to $28,000. The figure includes the window, labor, seal, and both warranty layers registered in writing. Call (844) 629-7617 for an exact quote on your openings; the estimate is free.
Are impact windows worth the cost in Enterprise?
For most Enterprise homes, yes, and the math is straightforward: impact windows cut cooling load against the valley sun and remove the need to board up every window when a wind event comes through. A window that costs $1,000 today can pay back over a decade in cooling savings and avoided storm damage. Call (844) 629-7617 and we will quote the energy and impact options side by side on paper so you can see the difference.
Why do impact window quotes vary so much between contractors in Enterprise?
Quotes vary by $200-$600 per window mostly because of glass rating, frame material, and what is included (permit, trim repair, warranty registration). The lowest bid often leaves out the permit or skips the second warranty registration, and that is a cost you pay later. We quote line by line and put both warranty layers in writing before the truck leaves. Call (844) 629-7617 to compare.
Can you install impact windows in Enterprise in a single day?
Most single-story Enterprise jobs of six to fourteen windows finish in one day, and typical two-story jobs finish in one to two. Our technicians measure twice, set the unit, seal it, and register the warranty before leaving. Call (844) 629-7617 to confirm your date; a live person answers 24/7.
Is it cheaper to repair or replace impact windows in Enterprise?
A single failed seal or broken pane can usually be repaired for $180 to $400, which is far cheaper than a $650-$1,450 replacement. But if the frame is out of true or the glass is not impact-rated for this zone, repair is money thrown at the wrong problem. Call (844) 629-7617 for an honest assessment; we tell you repair when repair is right.
TruePane Windows & Doors Enterprise is an authorized installer for more than a dozen manufacturer lines and backs every job with the 90-Day Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before we leave the driveway. Our technicians have up to 18 years of experience, and every one is background-checked and arrives prepared. We’ve been part of this community for over 42 years, and we plan to be here when the next homeowner on your street calls. If the pane is not true, the job is not done.
Call (844) 629-7617 for a free estimate. A live person answers every call, 24 hours a day, seven days a week. We’ll be there when we say, with a price on paper and no surprises on the bill.
Pricing reflects the Enterprise market as of 2026. TruePane Windows & Doors Enterprise offers free estimates – call (844) 629-7617.
What Our Customers Say
"French doors to the patio, custom size because this house was built in 1961 and nothing is standard. Measured twice, three weeks to fabricate like they warned, and the install day they laid runners over my floors without being asked."
- Marie S."Eleven windows replaced in two days. The crew chief, Marcus, showed me the level on every single frame before they caulked it. My wife noticed the street noise was gone before I did."
- Ronald P."Our bay window had rotted at the sill and two other outfits wanted to talk us into a flat picture window instead. TruePane rebuilt the opening and matched the original look. Neighbors have knocked on the door about it."
- Gene A.